Roofers in Glen Cove

Glen Cove runs its own permit counter. New shingles are on the city's list of jobs that need one.

Gloved hand pulling rotted roof boards with a hammer
Roofer standing on a half-stripped roof above a ladder

This page lists roofing companies based in the City of Glen Cove, Nassau County. Glen Cove is a city with its own building department at 9 Glen Street, not part of a town building department. The city lists roofing, siding and replacement windows as work that needs a permit. Its fee schedule charges $250 for the first $1,000 of value and $20 for each added $1,000. The roofer needs a Nassau County home improvement license.

Last reviewed October 31, 2026.

The dumpster is booked and the shingles are on order. In Glen Cove, the permit has to be on file before anyone climbs a ladder. The building department’s own page puts roofing, siding and replacement windows on its list of jobs that need one, right beside decks, sheds and demolition. Nassau County has three towns and two cities, Long Beach and Glen Cove, and Glen Cove runs its own permits out of 9 Glen Street.

The Glen Cove permit file for a reroof

The department page boils its rule down to one line: structural change means a permit. Then it lists roofing anyway. So a straight tear-off and reshingle still goes on the application, which has a roofing box under the work being requested. You write in the estimated cost of the proposed work. The fee schedule, as amended December 23, 2024, charges $250 for the first $1,000 of value and $20 for each further $1,000 or part of one. Add scope after approval and the amendment runs $20 per $1,000 of added value.

For a residential job, the city checklist revised November 2020 wants the completed application, a residential zoning data sheet, a current property survey, the Nassau County assessor’s sheet, and the contractor’s current Nassau County home improvement license with workers’ comp and liability insurance.

Drawings are the murky part. Page one of the checklist asks for two sets signed and sealed by an architect or engineer. Page two says the state Education Law seal requirement does not reach alterations costing under $20,000 or homes under 1,500 square feet of living area. Before you pay anyone to draw a plain reroof, ask the department whether it needs drawings at all.

The city code backs up the license line. Section 111-9 bars any contractor or subcontractor from residential work that needs a permit in Glen Cove without a license from Nassau County Consumer Affairs and the insurance the chapter requires. The Nassau license guide walks you through the county lookup.

Once issued, a permit lasts up to 2 years, per the checklist. It goes void if work has not started within 1 year of issue. The owner or contractor books inspections at least 48 hours ahead. Changes after approval go through an amendment form before the work happens, not after. And the application carries a signed promise on hours: 7 a.m. to 6 p.m. on weekdays, 9 a.m. to 6 p.m. on Saturdays.

Old houses, downtown blocks and where the rain goes

The checklist says work under a permit falls under state and federal asbestos rules. On an older house, ask the roofer whether anything coming off has been tested. Ask at the estimate, not on the morning of the tear-off.

Downtown adds a step. Under Section 280-10 of the city code, no building permit is issued for an exterior alteration or renovation inside the officially designated urban renewal area until the Planning Board approves it. The board gets 30 days from its first regular meeting after it receives the file. The City Clerk keeps the boundary description. A landmark or historic site has its own $35 building permit line on the fee schedule.

The city also cares where your roof water ends up. The checklist tells applicants to size drywells for a 5 inch rainfall and show them on the site plan, and it flags flood zone rules for properties inside one. If new gutters or leaders will tie into an existing drywell, ask whether the department wants to see it.

None of this picks your shingle. For materials, see the roof replacement page. For lifespans, the roof age guide. For what Long Island contractors publish on price, the cost guide.

Three Glen Cove shops in this directory

Three cards in the October 2026 directory carry a Glen Cove address: ABC Roof Repair and Skylight Repair on Morris Avenue, Elite Waterproofing & Roofing on Glen Street, and L.I.N.Y. Roofing LLC on School Street. All three list roofing. ABC adds skylights. Elite adds waterproofing. None was confirmed in our October 28, 2026 search of the Nassau register, which can mean a legal name we did not try. The city wants that license in the permit file regardless, so ask each company for its number and run it through the county lookup yourself. Our method is on how we check contractors.

Roofing companies based in Glen Cove

ABC Roof Repair and Skylight Repair

Glen Cove, Nassau County

View on Google Maps

Not confirmed in the Nassau register on October 28, 2026. Ask to see a current license.

Glen Cove snapshot, can change, not guaranteed.

Get a quote

Elite Waterproofing & Roofing

Glen Cove, Nassau County

View on Google Maps

Not confirmed in the Nassau register on October 28, 2026. Ask to see a current license.

Glen Cove snapshot, can change, not guaranteed.

Get a quote

L.I.N.Y. Roofing LLC

Glen Cove, Nassau County

View on Google Maps

Not confirmed in the Nassau register on October 28, 2026. Ask to see a current license.

Glen Cove snapshot, can change, not guaranteed.

Get a quote

Every contractor in Nassau County

Glen Cove permit fees, hours and inspections

Straight answers, with the source linked below.

What will the permit cost on a $15,000 roof in Glen Cove?

The city fee schedule, as amended December 23, 2024, charges $250 for the first $1,000 of value and $20 for each additional $1,000 or part of one. On a $15,000 estimate that works out to $250 plus 14 times $20, or $530, by our arithmetic. The application asks for the estimated cost of the work, and the department sets the final fee, not this page.

Can the crew start at 7 on a Saturday?

Not under the agreement printed on the city's building permit application. The applicant initials that construction, alterations or repairs will not start before 9 a.m. or run past 6 p.m. on Saturdays. On weekdays the window on that form is 7 a.m. to 6 p.m. The form does not list a Sunday window, so ask the department before you agree to a Sunday tear-off.

How long is a Glen Cove building permit good for?

The city's permit checklist says a building permit stays in effect for up to 2 years from issue, but work has to start within 1 year. A permit never started in that first year is void, and the owner has to apply again and pay again. The fee schedule lists two extensions at most, $75 for the first 6 months and $125 for the second.

Who books the inspection?

The checklist puts it on the owner or contractor, with at least 48 hours notice to the department, and warns that more than one inspection may be needed. If work that will be covered is closed up before it is inspected, it may have to be removed at the owner's expense. A failed first inspection means a $75 re-inspection fee on the schedule.

Can I reroof my own house in Glen Cove?

The city code lets a homeowner pull a permit for their own residential work only after passing a test, oral or written, given by the Building Department Administrator. The owner also files an affidavit that no contractor has been hired, other than a licensed plumber or electrician, and shows liability insurance. Bringing in a roofer later takes an amended application.

Do any of the three Glen Cove roofers listed here have a confirmed license?

Not yet. In our October 28, 2026 search of the Nassau register, none of the three was confirmed. A company can hold a license under a legal name we did not search, so a miss is not proof of anything. The city asks for the contractor's current Nassau license with the permit application, so ask for it before you sign.

Sources (8) checked October 2026
  1. City of Glen Cove, Building Department (fees effective 03/18/25)
  2. City of Glen Cove Fee Schedule (as amended 12/23/2024)
  3. City of Glen Cove, Building Permit Requirements Checklist (rev. 11/2020)
  4. City of Glen Cove, Building Permit Application (rev. 11/2020)
  5. City of Glen Cove Code, Section 111-9, Building permits (text via ecode360)
  6. City of Glen Cove Code, Section 280-10, Building permit and license requirements (text via ecode360)
  7. Nassau County, Cities, Towns and Villages
  8. Nassau County, license lookup
Get free quotes